Release Notes / Changelog

Version Changes
8-1-3 Bug
[RA70-324] - WWAN/LTE modem connection failed in specific cases
8-1-2 Bug
[RA70-265] - Fix SFTP permission problem on HW6 devices
8-1-1 Bug
[RA70-247] - Statusapi doesn't work anymore
[RA70-248] - GPS daemon is always started on GSM devices
[RA70-249] - Data24 configuration is only applied after a device restart
[RA70-252] - User defined firewall rules are not applied and firewall table is empty
[RA70-254] - OEM-specific configurations are not adopted
8-1-0 Bug
[RA70-159] - Modem controller script is not robust against unexpected responses
[RA70-169] - Diagnosis tool TCPDUMP can't be executed
[RA70-170] - OpenVPN connection can't be established if static key is used
[RA70-171] - Replacing the senders ip address of the client with the LAN ip address with OpenVPN connection doesn't work
[RA70-174] - Multiple OpenVPN ciphers aren't supported any more
[RA70-175] - Frontend-Modal to enter backup key for mbEDGE is not displayed
[RA70-230] - MPI service can't be started any more after factory reset
[RA70-233] - If VPN port is determined automatically, port 1194 is always closed

[RA70-160] - Enable GPS localization of RA70 devices with Telit GSM modules
[RA70-172] - Provide GPS information in DATA24
[RA70-166] - Port legacy gpio interface to descriptor based interface for MPI driver
8-0-2 Bug
[RA70-164] - Web-GUI does not show all device-specific changes for HW6
[RA70-165] - Restoring device configuration on Web-GUI does not work in any case
8-0-1 Bug
[RA70-161] - SimplyConnect service does not start on devices with firmware 8.0.0
[RA70-162] - Remove option that is not supported anymore when starting system daemons
8-0-0 Bug
[RA70-60] - With OpenVPN connections setup with interface option "TUN", the wrong OpenVPN interface appears in IP tables rule list
[RA70-99] - Buffer overflow in inputs management binary
[RA70-111] - NTP time update and server function does not always work reliably
[RA70-103] - IPsec does not work with aggressive mode
[RA70-147] - Port forwarding rules that address the interface "ALL" doesn't work correctly
[RA70-148] - Synchronising the system clock and the hardware clock does not work
[RA70-152] - The status of WIFI isn't shown on Web-GUI anymore
[RA70-143] - Pressing Dial-Out/FNC button for restoring factory settings does not work reliably

[RA70-10] - Update firmware build system to new version
[RA70-11] - Response if a file is too large to upload via Web-GUI
[RA70-29] - Implement edge version for eMMC chip in new hardware generation HW6
[RA70-77] - Prepair data24 runtime to be part of firmware
[RA70-146] - Add license validation for new HW6 edge implementation on eMMC chip
7-4-0 Bug
[RA70-5] - Automatic firmware update does not work
[RA70-6] - Fix SMS reading and improve SMS handling
[RA70-8] - NTP update always throws error message in device log
[RA70-9] - MQTT connection on Web-GUI does not work after activating MQTT API
[RA70-22] - Device comes online with on-demand connection, although respective input is not active

[RA70-2] - Control of the internet connection via key switch, not only VPN connection
[RA70-3] - Establish compatibility with Verizon USA
[RA70-7] - Conveniently set time through Web-GUI
7-3-2 Bug
[NERO-320] - Security fix
[NERO-321] - MQTT broker stops working under certain circumstances
[NERO-325] - MQTT returns an unexpected error

[NERO-324] - NTP: Offset correction optimized
7-3-1 Bug
[NERO-314] - Components connected to the LAN ports weren´t able to connect to the internet anymore
7-3-0 Bug
[NERO-302] - mbconnect24.mbn/.mbnx file is not renamed after configuration download from USB device
[NERO-313] - Problem with USBoverIP if USB device uses device driver of mbNET

[NERO-301] - Add IPSec IKEv2 support
[NERO-305] - OEM-Router: Firmware channels updated
[NERO-308] - Add access to device Status-API
[NERO-312] - Startup of mbEDGE optimized
7-2-3 Bug
[NERO-304] - Firmware update not possible on certain hardware due to invalid hardware-compatibility-check
7-2-2 Bug
[NERO-300] - Docker Hub API updated from V1 to V2
[NERO-303] - SIM card initialization process optimized after soft reboot
7-2-1 Bug
[NERO-298] - [Bug: MB-1022] Set hostname permanent even after a reboot
[NERO-299] - [Bug: MB-1023] Failure during Modem start if there is an empty SIM Tray inserted in the primary SIM Socket
7-2-0 Bug
[NERO-271] - [Bug: MB-881] It is no longer necessary to restart the device after adding a host entry.
[NERO-289] - [Bug: MB-995] On demand VPN connection to portal is disconnected if local device time is changed while connecting
[NERO-290] - [Bug: MB-978] If time synchronisation fails, the local time of the router is adjusted
[NERO-293] - An unconfigured device cannot open the CC-Online Help
[NERO-297] - Device does not start after firmware update

[NERO-255] - Do not restart modem when switching SIM socket
[NERO-273] - Hardening firmware update and configuration import
[NERO-278] - [Verbesserung: MB-763] Some serial settings were not displayed correctly when reopened
[NERO-280] - [Verbesserung: MB-948] A mbNET should only use IPv4 for OpenVPN communication
[NERO-281] - [Verbesserung: MB-984] Some useful information has been added to the web interface
[NERO-294] - [Verbesserung: MB-1006] Adaptation of channels for OEM devices

[NERO-115] - [Feature] FIMA-198 - Migration API for V1 portal was improved
[NERO-268] - [Feature: MB-888] Display MNC/MCC number of SIM card
[NERO-284] - [Feature: MB-513] Store device diagnose information locally on USB stick
[NERO-286] - [Feature: MB-556] Log analyzer added on the status page of the device
[NERO-287] - [Feature: MB-886] Preparation for a backup server address in the OpenVPN configuration
[NERO-288] - [Feature: MB-983] Integrate Wake-on-LAN into mbNET
[NERO-292] - [Feature: MB-1003] Display the uptime of the device on the web interface
[NERO-295] - Add OpenVPN HMAC as option
7-1-5 Bug
[NERO-291] - [Bug: MB-998] FTP Traffic masquerade through VPN connection (necessary for active FTP server)
7-1-4 Bug
[NERO-275] - [Bug: MB-959] API raise 500 Internal Server Error
7-1-3 Bugs
[NERO-269] - [Bug: MB-895] [EXTERNE MAIL] Sporadic loss of PROFIBUS connection
[NERO-270] - [Bug: MB-922] IPsec routing between networks not possible
[NERO-272] - [Bug: MB-573] Make the action "SMS" in alarmmanagement not selectable for devices without modem
[NERO-274] - [Bug: MB-951] sending an SMS with a space in the number can cause the modem to crash

[NERO-182] - [Support] BUGS-344 - WiFi Quickstart page shows green tick without active WiFi connection
7-1-2 Bug
[NERO-266] - Slow Data SIM cards led to network problems
7-1-1 Bug
[NERO-263] - [Bug: MB-902] Change quickstart permission flag to be compatible with V1 portal
[NERO-264] - [Bug: MB-903] Update OEM Favicon
7-1-0 Bugs
[NERO-125] - [BUGS-262] - mbNET does not terminate VPN connection after preset time
[NERO-226] - Timeout for VPN connections has to be ignored in any case on mbNET.rokey devices
[NERO-227] - Applying device configuration via mbDIALUP over network ends in an error
[NERO-221] - [Verbesserung: MB-759] - No output for TCPDUMP on Status/Diagnose page on web interface
[NERO-217] - Mosquitto service must be restarted if device API settings have been changed
[NERO-218] - Stop SIMPLY.connect service if USB drive with firmware or configuration is plugged in
[NERO-236] - Broken error message when creating new user with non-matching passwords
[NERO-243] - Changing a user name on device does not work
[NERO-250] - Config partition can be overfilled with backups, which can lead to problems on device
[NERO-251] - Fix upload of own HTTPS certificate for webserver
[NERO-257] - CTM cannot be switched between active and inactive reliably on web interface

[NERO-134] - Mount USB flash drive into NodeRed Container
[NERO-210] - [Feature: MB-519] - Separated user management on device for access on Flows and Dashboards
[NERO-127] - Recreate docker images for NodeRed and Portainer on device WebUI
[NERO-8] - Implement automatic forwarding after changing the LAN IP address of device

[NERO-256] - Revise WebUI appearance for improved usability: Consolidated colors, style and design
[NERO-223] - [Verbesserung: MB-826] - Adapt server list for first start process on device
[NERO-228] - [Verbesserung: MB-822] - The specification of multiple ports in forwarding rules does not work correctly
[NERO-232] - Improve behavior of diagnose actions on web interface and fix timeout problem
[NERO-253] - [Verbesserung: MB-851] - The admin user on a mbNET device must not be able to be deleted
[NERO-229] - Ignore port settings for ICMP firewall rules on web interface
[NERO-233] - Session handling refactoring for improved security
[NERO-234] - Update JQuery to version 3.6.0
[NERO-237] - Redirect to Quickstart form /login if user is already logged in
[NERO-238] - Force reload of js/css for every new firmware release
[NERO-244] - Remove NodeRed HTTP option for improved security
[NERO-247] - Fix tab scrolling on web interface
[NERO-252] - Update OpenVPN version
[NERO-254] - Avoid mosquitto password generation when starting or stopping Data24
7-0-4 Improvements
[NERO-258] - Add HW5 compatibility
7-0-3 Bug
[NERO-245] - [Bug: MB-843] Increase Timeout for SIM communication (Drillisch)
7-0-2 Bug
[NERO-220] - [Verbesserung: MB-760] OpenVPN setting "Remote maintenance active at: Digital input X (High)" is hidden
[NERO-215] - [Verbesserung: MB-807] fix sporadic starting problems
7-0-0 Bug
[NERO-171] - [BUGS-321] - Sporadically failing online connection when plc is connected via USB
[NERO-197] - [MB-757] - Send iSMS triggered from inputs
[NERO-192] - OpenVPN Web-GUI changes regarding key switch
[NERO-193] - Send extra initialization commands to Modem from web-GUI
[NERO-196] - [MB-616] - Write syslog to SD Card fixed

[NERO_168] - [Feature] FIMA-161 - Automatically choose VPN Port between 1194,443,80 if configured
[NERO-177] - [BUGS-338] - Add timezone for Sakhalin (UTC+11)

[NERO-191] - Update Linux Kernel version of firmware to Version 5.4 LTS
[NERO-202] - Revision of the update process for future firmware versions
[NERO-205] - Update dnsmasq to version 2.83
6-2-5 Bug
[NERO-126] - [Support] BUGS-234 - fix sporadic modem interrupts
[NERO-163] - [Support] BUGS-296 - Tags for I/O-Manager cannot be deleted on the device interface
[NERO-166] - [Support] BUGS-320 - Cyclic error message for crond in device log: "no such file or directory"
[NERO-167] - [Support] BUGS-298 - Created tags for I/O Manager are not displayed on diagnose site
[NERO-172] - [Support] BUGS-332 - In case of failover (WAN -> modem) the router does not reconnect via WAN, even if Internet via WAN is available again
[NERO-176] - [Support] BUGS-333 - Online e-Mail not readable
[NERO-187] - Rework IoT Firewall rules
[NERO-188] - Set back "connected Users" if OpenVPN connection breaks
[NERO-174] - Adapt timings for modem start-up

[NERO-137] - [Feature] FIMA-164 - Allow special characters (UNICODE) in SMS sent by device
6-2-4 Bug
[NERO-76] - mbEDGE rework Backup-Key functionality
[NERO-81] - [Support] BUGS-155 - LUA script started even if it was disabled
[NERO-83] - TCPDUMP on the diagnosis page in the quick start had no result
[NERO-111] - "Local set time" on web interface was not taken over to device
[NERO-112] - [Support] BUGS-228 - Updating firmware via TFTP menu on the web page didn´t work propely
[NERO-116] - USB-over-IP: Connection to USB devices couldn´t be established sporadically
[NERO-124] - [Support] BUGS-260 - Hide WAN menu in the quickstart at devices without WAN
[NERO-133] - pppd service optimized in the case of an error
[NERO-140] - [Support] BUGS-284 - Component on LAN couldn´t connect to internet in some cases
[NERO-143] - [Support] BUGS-309 - mbNET.rokey do not display 'on demand' in internet settings
[NERO-145] - Situation with Failover if WAN plugged but there is no internet connection optimized
[NERO-147] - After synchronization, modem devices sporadically stayed offline if an additional WAN cable with DHCP is connected
[NERO-161] - IoT firewall rules reworked

[NERO-95] - Make the subject line of alarm emails customizable
[NERO-146] - Protect portainer with mbNET-Login screen
[NERO-148] - [Feature] FIMA-230 - Connect WIFI to hidden networks